Recycled Low Density Polyethylene
Extrusion, blown film, injection molding
| Properties | Typical Value | Method |
|---|---|---|
| Density (23°C) | 0.91 – 0.93 g/cm3 | ISO 1183 |
| Melt Flow Index (190°C/2.16 kg) | 0.6 – 1.0 g/10 min | ISO 1133 |
| Tensile Strength at Break (50 mm/min) | ≥ 21 MPa | DIN 53504 |
| Elongation at Break (50 mm/min) | ≥ 610 % | DIN 53504 |
| Ash Content | ≤ 1 % | ISO 3451 |
| Form | 3 – 5 mm granules |
